Help and Support

Firmware update

Keep your CoaguChek INRange up-to-date

 

Before you download the firmware please read the disclaimer:

The Firmware has been released by Roche Diagnostics in all countries accepting the CE mark. Roche Diagnostics is committed to seek regulatory clearance in all countries where the CoaguChek® INRange meter is offered.

Please check via the local Roche Diagnostics affiliate that the software version has been cleared by your local regulatory authority prior to downloading the software.

 

Start the firmware update

CoaguChek INRange system
How to update your device

The following steps describe the firmware update process for the CoaguChek® INRange system via USB.

Prerequisites
  • CoaguChek® INRange meter
  • USB Type-A to Micro-USB cable (included in package)
  • Full AAA Batteries (Alkaline)
  • Windows or Mac Computer
  • Firmware file provided on this page
Release Note and Firmware

Please read the Release Note before downloading the Firmware Update.

Release Note

WARNING

Before you download the firmware please read the disclaimer:

The Firmware has been released by Roche Diagnostics in all countries accepting the CE mark. Roche Diagnostics is committed to seek regulatory clearance in all countries where the CoaguChek® INRange meter is offered.

Please check via the local Roche Diagnostics affiliate that the software version has been cleared by your local regulatory authority prior to downloading the software.

Prepare Meter for Firmware Update

Step 1.1

1.1

  • Insert Batteries
  • Power on CoaguChek® INRange Meter,  press on/off button
Step 1.2

1.2

  • Go to Menu > Other, press arrow down button
  • Select Menu > Other, press enter button
Step 1.3

1.3

  • Go to Firmware Update, press arrow down button
  • Select Firmware Update, press enter button

Connect Meter with Computer

Step 2.1

2.1

  • Make sure the computer is powered on and the user is logged in
  • Connect the Micro-USB cable with meter
Step 2.2

2.2

  • Connect the USB cable to the computer
  • Display on meter will show "For Firmware Update copy file to INRange-Drive"

Copy Update File to Meter

Step 3.1

3.1

  • Download Update file to computer (if not already done)
  • Locate the file in Windows Explorer or Finder (Mac)
  • Select file, e.g. "Update0l.04.12-YT.znu"
  • Right cliick on file "Update0I .04.12-YT.znu" and select "Copy"
Step 3.2

3.2

  • Locate CoaguChek® INRange meter in your Windows Explorer or Finder (Mac). It wil be listed as a local drive - like a USB memory stick
Step 3.3

3.3

  • Select CoaguChek® INRange meter in your Windows Explorer or Finder (Mac)
  • Right click inside CoaguChek® INRange and select "Paste"
Step 3.4

3.4

  • Update process is started
Step 3.5

3.5

  • CoaguChek® INRange will execute the update automatically within several minutes
  • Displays will automatically change during the update process

Verify Firmware Version

Step 4.1

4.1

  • Wait until meter automatically powers off after the update process
  • Turn on the meter, Press on/off button
Step 4.2

4.2

  • Go to Menu > Other, press arrow down button
  • Select Menu > Other, press enter button
Step 4.3

4.3

  • Select About, press enter button
  • Check for Firmware i.e. "Update01.04.12-YT"on the display

If Firmware listed on display is different than "01.04 .12 YT"', the update is not complete. Please try again to update the CoaguChek® INRange meter by repeating the steps described. If the update still does not work, please contact Roche Diagnostics.